Molecular structure and properties of click hydrogels with controlled dangling end defect

In this study, controlled amount of dangling ends is introduced to the two series of poly(ethylene glycol)‐based hydrogel networks with three and four crosslinking functionality by using click chemistry. The structure of the gels with regulated defect percentage is confirmed by comparing the results of low‐field NMR characterization and Monte Carlo simulation. The mechanical properties of these gels were characterized by tensile stress–strain behaviors of the gels, and the results are analyzed by Gent model and Mooney–Rivlin model. The shear modulus of the swollen gels is found to be dependent on the functionality of the network, and decreases with the defect percentage. Furthermore, the value of shear modulus well obeys the Phantom model for all the gels with varied percentage of the defects. The maximum extension ratio, obtained from the fitting of Gent model, is also found to be dependent on the functionality of the network, and does not change with the defect percentage, except at very high defect percentage. The value of the maximum extension ratio is between that predicted from Phantom model and the Affine model. This indicates that at the large deformation, the fluctuation of the crosslinking points is suppressed for some extend but still exists. Polymer volume fractions at various defect percentages obtained from prediction of Flory–Rehner model are found to be in well agreement with the swelling experiment. All these results indicate that click chemistry is a powerful method to regulate the network structure and mechanical properties of the gels. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1227–1236     

A new nonlinear optical silicate carbonate K2Ca[Si2O5](CO3) with a hybrid structure of kalsilite and soda-like layered fragments

Single crystals of a new silicate carbonate, K₂Ca[Si₂O₅](CO₃), have been synthesized in a multi-components hydrothermal solution with a pH value close to neutral and a high concentration of a carbonate mineralizer. The new compound has an axial structure (s.g. P6₃22) with unit cell parameters a = 5.04789 (15), c = 17.8668 (6) Å. Pseudosymmetry of the structure corresponds to s.g. P6₃/mmc which is broken only by one oxygen position. The structure consists of two layered fragments: one of the type of the mineral kalsilite (KAlSiO₄) and the other of the high-temperature soda-like α-Na₂CO₃, Ca substituting for Na. The electro-neutral layer K₂[Si₂O₅] (denoted K) as well as the layer Ca(CO₃) (denoted S) may separately correspond to individual structures. In K₂Ca[Si₂O₅](CO₃) the S-K layers are connected together via Ca-O interactions between Ca atoms from the carbonate layer and apical O atoms from the silicate one, and also via K-O interlayer interactions. A hypothetical acentric structure, sp.gr. P-62c, is predicted on the basis of the order-disorder theory. It presents another symmetrical option for the arrangement of K-layers relative to S-layers. The K,Ca-silicate-carbonate powder produces a moderate SHG signal that is two times larger that of the α-quartz powder standard and close to other silicates with acentric structures and low electronic polarizability.     

A DFT study of 5-fluorouracil adsorption on the pure and doped BN nanotubes

The electronic and adsorption properties of the pristine, Al-, Ga-, and Ge-doped BN nanotubes interacted with 5-fluorouracil molecule (5-FU) were theoretically investigated in the gas phase using the B3LYP density functional theory (DFT) calculations. It was found that the adsorption behavior of 5FU molecule on the pristine (8, 0) and (5, 5) BNNTs are electrostatic in nature. In contrast, the 5FU molecule (O-side) implies strong adsorption on the metal-doped BNNTs. Our results indicate that the Ga-doped presents high sensitivity and strong adsorption with the 5-FU molecule than the Al- and Ge-doped BNNTs. Therefore, it can be introduced as a carrier for drug delivery applications.     

Montecrinanes A–C: Triterpenes with an Unprecedented Rearranged Tetracyclic Skeleton from Celastrus vulcanicola. Insights into Triterpenoid Biosynthesis Based on DFT Calculations

Three new triterpenoids with an unprecedented 6/6/6/6‐fused tetracyclic carbon skeleton, montecrinanes A–C ( 1 – 3 ), were isolated from the root bark of Celastrus vulcanicola, along with known D:B‐friedobaccharanes ( 4 – 6 ), and lupane‐type triterpenes ( 7 – 12 ). The stereostructures of the new metabolites were elucidated based on spectroscopic (1D and 2D NMR) and spectrometric (HR‐EIMS and HR‐ESIMS) techniques. Their absolute configurations were determined by both NMR spectroscopy, with (R)‐(?)‐α‐methoxyphenylacetic acid as a chiral derivatizing agent, and biogenetic considerations. Biogenetic pathways for montecrinane and D:B‐friedobaccharane skeletons were proposed and studied by DFT methods. The theoretical results support the energetic feasibility of the putative biogenetic pathways, in which the 1,2‐methyl shift from the secondary baccharenyl cation represents a novel and key reaction step for a new montecrinane skeleton.     

The Tetracyanopyridinide Dimer Dianion, σ‐[TCNPy]22−

The reaction of 2,3,5,6‐tetracyanopyridine (TCNPy) and Cr(C₆H₆)₂ forms diamagnetic σ‐[TCNPy]₂^2? possessing a 1.572(3) Å intrafragment sp³–sp³ bond. This is in contrast to the structurally related 1,2,4,5‐tetracyanobenzene and 1,2,4,5‐tetracyanopyrazine that form π‐dimer dianions possessing long, multicenter bonds.     

A novel Ni/Na – Containing inorganic-organic hybrid supramolecule based on polyoxometalate and EDTA with ultraviolet-visible light photochromism

A novel Ni/Na – containing inorganic-organic hybrid supramolecule {(PW₁₂O₄₀)·[Na₂(NiH₂EDTA·H₂O)(H₄EDTA)·2H₂O]·2H₂O·H₃O}_n (short for NiEDTA-PW₁₂) has been successfully synthesized by solution method, and investigated by thermogravimetric-differential thermal analysis (TG-DTA), ultraviolet visible (UV-Vis) spectroscopy, cyclic voltammetry (CV), photoluminescence (PL), ultraviolet visible diffuse reflectance spectrum (UV-vis DRS) and single-crystal X-ray diffraction (XRD). NiEDTA-PW₁₂ exhibits intriguing infinite supramolecular structure with Na⁺ ions as linker. Furthermore, NiEDTA-PW₁₂ displays a fast-responsive reversible photochromism under ultraviolet or visible light. The photochromic property of NiEDTA-PW₁₂ has been investigated by techniques of UV-vis DRS and PL, and the impact of the O₂ on fading of the colored NiEDTA-PW₁₂ has been investigated.     

基于四波混频过程和线性分束器产生四组份纠缠

多组份纠缠是量子信息处理的重要资源,它的产生通常涉及到许多复杂的线性和非线性过程.本文从理论上提出了一种利用两个独立的四波混频过程和线性分束器产生真正的四组份纠缠的方案,其中,线性分束器的作用是将两个独立的四波混频过程联系起来.首先应用部分转置正定判据研究了强度增益对四组份纠缠的影响,结果表明,在整个增益区域内都存在真正的四组份纠缠,并且随着强度增益的增加,纠缠也在增强.然后研究了线性分束器的透射率对四组份纠缠的影响,发现只要线性分束器的透射率不为0或1,该系统也可以产生真正的四组份纠缠.最后,通过研究该系统可能存在的三组份纠缠和两组份纠缠来揭示该系统的纠缠结构.本文理论结果为实验上利用原子系综四波混频过程产生真正的四组份纠缠提供了可靠的方案.     

亲水性两性离子聚合物刷的构象与结构

本文应用分子场理论,研究暴露于水蒸气中的亲水性两性离子聚合物(HP)刷的构象与结构.理论模型考虑HP-水(P-W)氢键和水-水(W-W)氢键效应,以及HP单体之间的偶极-偶极相互作用.研究发现,P-W与W-W氢键决定着HP的水合性,P-W氢键形成,会诱导HP刷溶胀.我们通过考察HP单体间的偶极-偶极相互作用发现,随着偶极-偶极相互作用增强,HP链在垂直培基表面沿着链方向,形成了结节状结构.这是由于HP单体之间的偶极-偶极静电吸引作用导致单体间汇聚结节,这种结节在刷内产生了较强的排斥体积作用,因此,这种HP刷具有抗污性能.在较高的接枝密度环境下,由于HP链间单体之间的偶极-偶极静电吸引作用,会形成链间单体-单体的结节,在刷内形成结节网络状凝胶结构,这种结构的出现,会使得HP刷呈现极强的抗污性.另外,当体系中水蒸气浓度增加、水合相互作用增强时,增加的P-W氢键将平衡HP单体之间的偶极-偶极相互作用,使得结节解开,聚合物链伸展.我们的理论结果符合实验观测,由此表明,P-W氢键效应,以及HP单体之间的偶极-偶极相互作用决定着HP刷的构象转变和结构特性,刷内出现的两性离子聚合物链内单体间的结节和链间单体结节状凝胶结构,是两性离子聚合物刷呈现较强抗污性的本质特性.     

双稳态结构中的1/2次谐波共振及其对隔振特性的影响

以典型的双稳态系统——屈曲梁结构为例,基于等效模型,结合解析、数值和实验手段,研究了双稳态结构中的1/2次谐波共振特性、演化过程、参数调节规律及其对隔振特性的影响.研究发现,当非线性刚度系数或激励幅值增加到一定程度时,系统会在一定带宽下产生显著的1/2次谐波共振;随着激励幅值增加,阻尼系统的1/2次谐波遵循“产生-增强-衰退-消失”的过程,该过程对峰值频率和峰值传递率有重要影响;适当提高非线性强度能有效改善双稳态结构隔振特性.针对双稳态屈曲梁结构开展的实验验证了1/2次谐波特性和隔振特性变化规律.